Monday, February 20, 2012

POV display v2.0

Major Update: Its been awhile since I started this rebooted attempt at a POV display. Since then I've moved on up to the pic16f886 and etched a smd pcb for the controller. Here are some pics and a test video with some more explanations. I'm hard at work coding software for it now that the hardware is almost complete. More to come.

 
 Home etched board. I drew the traces with a fine tipped permanent marker.
 Another view.
 All soldered and ready to program the firmware over the in circuit serial programming header.
 Everything secured and wired up. Note the penny I am using to balance the rotor.
 First test is a success!
 Looks even cooler in the dark.
Update: I've finally gotten around to coding a full character set, string manipulation, and scrolling text animation. Unfortunately I'm heading back to university and wont get to touch this project until winter break. I will keep up churning out software projects though (its the only thing that keeps me sane between classes). Plus when I get settled I will start up TeardownTube episodes again. Don't worry I have a lot planned.

16 comments:

  1. hey nice project
    can u email me the code and the circuit daigram plz

    email is : luman_united@yahoo.com

    ReplyDelete
  2. A very good one and attractive.
    Kindly help me with the details of the code and the circuit diagram to my id nagaraj1969@gmail.com.

    Thanks in advance.

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. can u email me the code and the circuit daigram plz
    sureshchitmil@gmail.com

    ReplyDelete
  5. would you mind sending me the code and schematic
    awosog57@gmail.com

    ReplyDelete
  6. can u email me the code and the circuit daigram plz
    radythefather@hotmail.com

    ReplyDelete
  7. excellent, very nice... i'm Sebastian from Argentina... would you help me to make some like this.. I need the code to analize and schematic to make it... thanks... my mail sebastianalemany22@gmail.com

    ReplyDelete
  8. Hi can u send me schematic? jlucic6@gmail.com

    ReplyDelete
  9. Very nice job.. i was wondering if you could send the code and the circuit diagram? im thinking on doing something like this and it would be very helpful :) .. pliiiis! my email is paola.xaq@gmail.com

    ReplyDelete
  10. Hi, very nice project you got going. Is it possible if you could email me the code/schematic for this project? I was wanting to do something similar to do this for a side project of mine. Email is fghia001@gmail.com. Sorry for the request and thanks for reading this post. Keep up the good work!

    ReplyDelete
  11. Hi Sir, Nice work. Can you send me the schematic and the other details for this project? renzsky07@gmail.com

    ReplyDelete
  12. can you please give the schematic hex file code,also what motor is that,how many rpm,part list
    .thanks
    domdomgin@yahoo.com

    ReplyDelete
  13. can i make one with only 4 leds?
    sathesiddharth14@gmail.com

    ReplyDelete
  14. would you please send me the code and schematic of the project
    mahmoudhussein@asme.org

    ReplyDelete
  15. Hello like your project would you mind sending me the code and schematic Alsovain@gmail.com

    ReplyDelete
  16. Hello like your project would you mind sending me the code and schematic antogato08@gmail.com

    ReplyDelete